WHY MYNX?
REMOVE THE MINERALS. RESTORE THE SURFACE.
Hard water leaves behind calcium and mineral deposits that can dull paint, cloud glass, and eventually etch into the surface.
MynX attacks that buildup chemically, helping dissolve bonded mineral residue before it becomes a permanent correction problem.
MINERAL DEPOSIT REMOVAL
BREAK DOWN THE DEPOSITS. RESTORE THE FINISH.
Hard water leaves behind calcium and mineral residue that can cling to paint, glass, and other exterior surfaces.
MynX uses an acid-active formula to dissolve that buildup at the source, helping restore clarity and a cleaner surface before mineral deposits have the chance to become permanent etching.
FORMULA INTEL // MYNX
ACID-ACTIVE FORMULA
TARGETS MINERAL DEPOSITS, CALCIUM BUILDUP, AND HARD-WATER RESIDUE AT THE SOURCE.
PAINT + GLASS + METAL
DESIGNED FOR COMPATIBLE PAINTED SURFACES, AUTOMOTIVE GLASS, AND BARE METAL.
FAST-ACTING CLEANING
WORKS QUICKLY TO BREAK DOWN BONDED MINERAL CONTAMINATION BEFORE IT BECOMES HARDER TO CORRECT.
TARGETED DECONTAMINATION
BUILT SPECIFICALLY FOR WATER SPOTS AND MINERAL BUILDUP—NOT GENERAL-PURPOSE CLEANING.
PAINT DECONTAMINATION
Hard-water minerals can bond to paint and leave behind visible spotting that dulls gloss and clarity.
MynX chemically breaks down those deposits, helping restore a cleaner surface before polishing becomes necessary.
GLASS MINERAL REMOVAL
Mineral buildup on windshields and side glass can create cloudy spotting that ordinary glass cleaners leave behind.
MynX targets bonded hard-water residue to help restore clear, clean glass.
METAL + CHROME CLEANING
Calcium and mineral deposits can collect around chrome, trim, and compatible bare-metal surfaces.
MynX helps dissolve that contamination and restore a cleaner appearance without relying on aggressive mechanical correction.
APPLICATION PROTOCOL
TARGET THE DEPOSITS. CONTROL THE CONTACT.
01 — WASH + DRY THE VEHICLE
Wash and completely dry the vehicle before using MynX. Work on a cool surface out of direct sunlight.
02 — PROTECT YOUR HANDS
Wear nitrile gloves before handling and applying the product.
03 — APPLY TO THE TOWEL
Lightly spray MynX onto a clean microfiber towel. Do not spray the product directly onto the vehicle surface.
04 — WORK A SMALL SECTION
Gently wipe MynX across a small area of the affected surface, concentrating on the mineral deposits or water spots.
05 — RINSE WITHIN 15 SECONDS
Immediately rinse the treated area thoroughly with water. Do not allow MynX to remain on the surface for more than 15 seconds or dry on the surface.
06 — INSPECT + REPEAT
Inspect the area after rinsing. Repeat the process as needed for stubborn mineral deposits before moving to the next section.
FIELD NOTE // Work one small section at a time. MynX is an acid-based decontamination chemical, so controlled contact time and thorough rinsing are critical.
DO NOT USE ON HOT SURFACES OR IN DIRECT SUNLIGHT. DO NOT APPLY TO PLASTIC, MIRRORS, BARE METAL, OR ALUMINUM.
MYNX // FIELD INTEL
COMMON QUESTIONS. CLEAR ANSWERS.
MynX is designed to dissolve hard-water spots, calcium deposits, mineral buildup, and other mineral-based contamination that regular washing may leave behind.
MynX uses an acid-based formula to chemically break down mineral deposits so they can be removed from the surface without relying solely on mechanical polishing.
MynX removes the mineral deposit itself. If the minerals have already etched or physically damaged the surface, polishing or additional correction may still be required.
Yes, on compatible painted automotive surfaces when used exactly as directed. Work on a cool surface, apply MynX to a microfiber towel, and rinse the treated area within 15 seconds.
MynX can be used on compatible automotive glass for mineral buildup and hard-water spotting. Do not use it on mirrors, and always follow the short contact-time instructions.
No. Lightly spray MynX onto a clean microfiber towel first, then wipe the affected area. This provides better control over where the acid-based formula is applied.
No more than 15 seconds. Immediately rinse the treated section thoroughly with water before moving to another area.
No. Never allow MynX to dry on the surface. Work in small sections and rinse each treated area promptly.
No. Use MynX on cool surfaces and out of direct sunlight or extreme heat.
Do not apply MynX to plastic, mirrors, bare metal, or aluminum.
Yes. Wash and dry the vehicle first so loose dirt and contamination are removed before treating the bonded mineral deposits.
Rinse the area thoroughly, inspect the surface, and repeat the controlled application if necessary. For severe deposits, multiple short treatments are safer than extending the contact time beyond 15 seconds.
THE MYNX PROTOCOL
MynX uses controlled acid-active chemistry to break down hard-water spots and mineral buildup on compatible painted and glass surfaces before they become a larger correction problem.
FIELD REPORTS
PROVEN IN THE FIELD.
Read the field reports from customers who put MynX to the test.